Main ❯ Educational projects ❯ WAYU GIB: Device specification
![]() |
|
|---|---|
| www.unavlab.com support@unavlab.com |
WAYU GIB - Navigation buoy Device specification |
The WAYU GIB navigation sonobuoy of the WAYU system, in a set of four such devices, forms a floating long navigation base that supports positioning of the WAYU Pinger pinger.
The device has a one-piece design, is made of high-strength polyurethane and polypropylene, and switches off automatically when it enters the water. It does not require any settings or calibrations. Buoyancy is provided by an easily noticeable float made of ethylene-vinyl acetate (EVA).
| PARAMETER | VALUE |
|---|---|
| DIMENSIONS1 (Ø x h) | 55 x 1000 mm |
| WEIGHT (dry) | 1.55 kg |
| MAXIMUM BATTERY LIFE2 | 12 hours |
| MAXIMUM VELOCITY RELATIVE TO PINGER | +/- 2 m/s |
| OPERATING TEMPERATURE RANGE | -10 .. 50 °C |
| MAXIMUM ACOUSTIC COMMUNICATION RANGE3 | 300 m |
| ACOUSTIC SIGNAL FREQUENCY | 25000 Hz |
| REFERENCE ELLIPSOID | WGS-84 |
| BUILT-IN BATTERY TYPE | LiFePO4 |
| BUILT-IN BATTERY CAPACITY | 18 W·h |
| TRANSDUCER CABLE LENGTH | 1 m |
| BUILT-IN RADIO MODULE TYPE | 433 MHz |
| MAXIMUM RADIO MODULE POWER | 100 mW |
| MAXIMUM RADIO COMMUNICATION RANGE4 | 300 m |
| CHARGING THE BUILT-IN BATTERY | With the included charger |
| CHARGING TIME OF THE BUILT-IN BATTERY | 8 h |
| MSDS OF THE BUILT-IN POWER SUPPLY | ELECTRONIC VERSION OF THIS DOCUMENT |
|---|---|
1 Not including the receiving transducer on a 1 m cable, not including the float (Ø x h) 125 x 160 mm.
2 With a new battery, at an ambient temperature of 20 °C.
3 A parameter that determines the maximum range at which signal reception is possible, based on the electro-acoustic parameters of the transmitter and receiver, the spatial decrease in the intensity of sound energy, attenuation in the medium and the acoustic noise level.
4 Achieved in the absence of interference, in open areas. The receiving antenna may need to be raised several meters higher.